Addon Wrapped Heart wrinkled silver
Addon Wrapped Heart wrinkled silver
International Ring Size Guide
Mood Size EU (mm) size of the circumference |
US | UK | Diameter (mm) |
|---|---|---|---|
| 50 | US 5 | J | 15,7 |
| 52 | US 6 | L | 16,5 |
| 54 | US 7 | N | 17,2 |
| 56 | US 8 | P | 17,8 |
| 58 | US 8,25 | P 1/2 | 18,4 |
| 60 | US 9 | R | 19,1 |
| 62 | US 10 | T | 19,7 |
| 64 | US 10,75 | V | 20,3 |
| 66 | US 11,5 | X | 21 |
| 68 | US 12,25 | Z | 21,5 |
| 70 | US 13 | Z+1 | 22,3 |
| 72 | US 13,75 | 22,9 |
Determine the correct size of your ring
1st method: using a ring you already own (diameter)
You already have a ring on hand? Then simply measure the inside diameter of the ring. You can then find your size by converting using the table above.
If you can't find your exact size, then take the next size up.
2nd method: measure the circumference of your finger
To find out your ring size, simply take a piece of wire, dental floss or paper. Wrap it loosely around the spot on your finger where you want to wear the ring and mark where it overlaps. Then measure the length. The millimeters measured reflect the inner circumference of the ring.
If you can't find your exact size in the chart above, then take the size that is above. For example, if your finger circumference is 57mm, then take the size 58.
Example : 52 mm (circumference)
Wrinkled silver addon "Wrapped Heart"
Design: Amila Pousaz, Malvina Collaud and Alicia Bornand
Precautions / informations
This addon is made of 2 parts in wrinkled sterling silver. This addon can only be worn with a steel medium 3D hearts or a rose gold medium 3D heart. This addon will wrap your medium 3D hearts. This addon cannot be worn if the medium 3D hearts is not included in the composition.
Please note: the medium 3D hearts is not included in the price, it must be ordered separately.
Click here if you want to buy the steel medium 3D hearts.
Click here if you want to buy the rose gold medium 3D hearts.
This addon can be worn on an extra small base provided that only one side of the addon is put on the base.
The creation time is about 10 working days.